Hey guys,

I’ve just published a new video about why some people might not be getting many of their SEnuke submissions indexed in Google even if you’ve been spinning your articles to 50% uniqueness, and how to get around that. Watch this video if you want to achieve near 100% indexing of all your content! Newbies and advanced SEnukers alike, watch this video!

Check it out here.

It should be a real eye-opener for most people! It talks about common mistakes (I guarantee you’re making most of them!) with spinner articles and how Google uses these mistakes to detect that multiple versions of your spun article were all written by the same person and come from the same source article, and decides to not index them!

Here’s a written transcript:  http://www.senuke.com/advanced_spinning_transcript.pdf

Leave comments if you have questions or comments!

-Areeb

Hey guys,

The saga continues! We’ve just added 28 new HIGH PR dofollow web 2.0 sites in the profile nuke module!

They’re ALL PR 6. Nothing lower!

Imagine how much link juice you can get from so many PR 6 websites!

This brings the site count for the profile nuke module to 75!

Yep, we’re working everyday to make sure you get to the top of Google Now there should be no excuse for not being #1 for your chosen keyword!

Other than that, we’ve also fixed all broken sites.

Enjoy!

-Areeb

Hallelujah!

Exciting news!

We’ve just released version 6 which comes with probably the most requested feature of all time: make SEnuke run in the background!

Until now whenever you chose to do an SEnuke submission with automatic captcha solving enabled, it required screen focus. This meant that you couldn’t really do anything on your computer while SEnuke was running.

This limitation is no more! We’ve finally figured out how to make SEnuke run completely in the background with automatic captcha solving enabled! So if you were avoiding SEnuke thus far because you didn’t have another computer to run it on while you were doing other stuff, it’s time to celebrate!

Here’s what else has just been added:

1. A sound plays whenever SEnuke is done any task that you have to wait for including: account creations, submission, email verification, pinging.

2. Over 20 new web 2.0 profile nuke sites added!

3. Added consistent choice syntax in spinner: This is a cool new feature to improve your spinner variations. This is how you use it. If you type in the SEnuke editor the following text:

#1# Option 1a #/1# #2# Option 2a #/2# #3# Option 3a #/3#
#1# Option 1b #/1# #2# Option 2b #/2# #3# Option 3b #/3#

 The output of this will be either:

1. Option 1a
   Option 1b
   -or-
2. Option 2a
   Option 2b
   -or-
3. Option 3a
   Option 3b

It will NEVER be Option 1a and Option 2b together, or Option 2a and Option 3b together like what you would have with the regular curly brackets for spinning. It’s not random choic, it’s consistent choice.

The number between the two hash symbols defines an index for the option. You can have numbers from 1 to 100 there. Everytime SEnuke spins the article, it picks one of the numbers randomly, let’s call it x and only shows the text between #x#….#/x#. The text between all other numbers is discarded. This is highly useful for adding variation to your spun articles.For example if you had two  stories in your article about your friend Joe and Bob and you wanted SEnuke to show only one of these stories… and later in the article you wanted to mention something about Joe or Bob depending on which one SEnuke chose first, you can only do that with the consistent choice brackets.

A blog post will soon be posted on how to best spin your articles based on observations of Google’s indexing algorithm as of today using these brackets. You will be notified by email when that post is up.

4. We have also just added a move up and move down menu in the main window, options window and batch research window for small screens such as netbooks. Enable it by going to Windows->Show small screen menu.

5. Last but not least, broken sites have been fixed

Enjoy! All these 20+ web 2.0 profile nuke sites that have just been added are PR 6+ so they wil do wonders for your ranking!

-Areeb

Hey guys,

It’s 2010, and we’re giving you a little more than 20+10 reasons to smile!

I am very excited to announce an update that will literally send your websites soaring in the search engines.  Say hello to THIRTY THREE extremely powerful dofollow websites in the Web 2.0 Profile Nuke module.

They’re located in the Web 2.0 Profile Nuke module:

These are the kind of websites that Angela Edwards and Paul Johnson are famous for at the WarriorForum.

You sign up to them and can then place links in your profile section.

We have hand-picked 33 such websites to include in this release (with more to be added every week).

Here’s the PR distribution:

•  4 PR 8 websites
• 22 PR 7 websites!!!
• 6 PR 6 websites
• 1 PR 5 website

Now you might be thinking.. hey will these websites suffer the same fate as the 500 KickApps sites that you announced a while back? They all turned Nofollow within a couple of weeks.

Well the answer is no. The reason those websites all simultaneously turned nofollow was because they were all built on the same website platform that was served from the kickapps servers. So as soon as kickapps noticed the drastic increase in signups, they changed their platform to serve nofollow links in order to thwart the spammers. And one change on the kickapps servers affected ALL of these websites. This was something that we hadn’t accounted for when we released that update.

ALL of these websites that we have just added now are using different platforms to run the site. It’s possible that some of these websites might turn nofollow in the future,  in which case they will be replaced with other dofollow sites. But ALL of them will never simultaneously turn nofollow like the previous sites.

And as I have announced previously, we have a new member on the SEnuke Team whose only job is to add new websites to SEnuke, so every week you will be seeing new websites in this module!

Note for old members:

If you’ve cancelled your SEnuke subscription in the past, you can set up your PayPal subscription again and start using the software immediately. Just login to http://www.senuke.com/membership/login.php with your previous account details (DON’T create a new account) and you’ll be told what to do.

Notes on usage:

If you haven’t yet, please watch the video tutorial on the Web 2.0 Profile Nuke module here:  http://www.senuke.com/videos/profilenuke/profilenuke.htm

All the websites we have just added allow for an unlimited number of links to be placed in the profile section. But we don’t recommend adding more than 3-4 links because it can make your profile look really spammy, resulting in immediate deletion.

Also, don’t bother adding RSS feeds for posting. These websites don’t support it. But of course the “about me” section is still supported by all these sites.

Captcha solving is free for these sites for now, since there’s only 33 of them. No need to pay for captchas at another service. However, no promises for free captcha solving once the site list in this module gets too large.

So go ahead and build some high PR backlinks and blast your websites to the top of Google! So many PR 7 and PR 8 dofollow sites will do amazing things for your Google, Yahoo and Bing rankings.

Update Jan 5th:

Added 3 new high PR dofollow websites in the Web 2.0 Profile Nuke module which brings the count up to 36!
Added new option in the Windows menu called ‘Show Small Screen Menu’ for using SEnuke on small screens.
Added keyboard shortcuts for switching modules fast like Ctrl+F1 (check the Switch Module menu for list)

Here’s to a prosperous new year!

-Areeb

Hey guys,

Our aim with this update was to increase success rates for everyone.

With software that interacts with as many sites as SEnuke does, there will always be failures, no matter how exquisite the programming. The reason? The website is feeling moody. Ok not quite. But some websites sometimes throw back a difficult-to-decipher message, which hints at a problem. A problem that has a solution, which very few people are aware of.

Since we interact with these websites more than we interact with our families… we usually know the solution to most of these problems.

So we’ve just added a “SEnuke Solution Center”. Whenever SEnuke detects a problem with a website which has a known solution, that website will get skipped and the problem along with the solution to fix that problem will be mentioned in the solution center.

An example? Maybe you’ve come across the 402 Payment Required message on Tripod or some other website? This happens when the website detects your IP address as being outside of North America and therefore doesn’t let you sign up. There’s an easy solution to this, use a SEnuke premium proxy, because they’re all located in North America!

Now I bet most of you would never have thought of that if you just saw “402 Payment Required”, which is what the SEnuke Solution Center is for! So whenever SEnuke detects this kind of error, it will skip the website and show the problems along with the solutions at the end of the submission process.

No more racking your brain wondering why a website failed

Other than that…

• 2 new social network sites added: Bravejournal and Typepad.
• Work is under way for adding lots of dofollow websites in the Profile Nuke module. Another update will be out in a few days with these new websites
• All broken websites fixed

In other news, work on SEnuke X is going well, and we should be nearing an alpha stage for the software within a month or so. After that, it could take another couple of months to bring things up to the level that we deem suitable for launch.

Also, a new programmer has just been added to the SEnuke team whose only task is to add new websites into the software. So the SEnuke site list will grow at a fast pace now

-Areeb

Hey guys,

Just released an update which fixes broken sites and adds an important feature: double-clicking a red border in the SEnuke Submitter screen forces the program to continue.

Usually whenever you do a submission, for each site SEnuke waits for the border to turn green (meaning, the page has finished loading) but if you think that a certain image or something on the page is taking too long to load, hence keeping the border red unnecessarily, you can double click the red border, and it’ll force the program to continue without waiting for the page to finish loading. Just make sure that when you do this, most of the page has finished loading, otherwise SEnuke will auto-retry from the beginning.

Another thing in this update: SEnuke now waits longer for a response from the captcha service. Normally SEnuke used to time out within 45 seconds if it couldn’t get a response to a captcha. But sometimes the captcha service is so busy that it can take over a minute for a response. In previous versions, SEnuke would just time out. But now it’ll wait upto 2.5 minutes for a response.

Note to those having problems with the free captcha solving service: lately (not quite sure why) our servers have been bombarded with an onslaught of captchas that need to be solved. We’re working on growing the size of the captcha solving team, but until then if you are having troubles with the free captcha solving service, just buy 1000 captchas from BypassCaptcha for $7. These 1000 captchas take FOREVER to use up if you’re not using the profile nuke module (since you only use them in the Web 2.0 account creation module mostly). Just a good back up in case. Or you can solve the captchas yourself by pressing “Disable Automatic Captcha Solving” in the SEnuke Submitter window.

-Areeb

Hey guys,

Just released a small update, here’s what’s up:

Added HotSpotShield Integration!

Many users were experiencing low account creation success rates because lots of SEnuke users were creating accounts using the same proxy. We’ve just addressed this problem!

HotSpotShield is a free service that helps people mask their IP addresses while surfing online. It works similiar to a proxy except that you have to download and install their software on your system to be able to use it. We’ve just integrated this with SEnuke!

Now you can get a completely separate IP address from all other SEnuke users for awesome success rates!

Here’s all you need to do:

1. Download HotSpotShield and install it.
2. Run it.
3. Disable proxy in SEnuke.

Get down to nuking!

You can change the IP address on demand! Right click on the HotSpot Shield icon in the system tray and click Disconnect. Then click Connect again and you have a brand new IP address

Note: Because it’s a free service, it’s slower than the proxies provided by SEnuke. It’s supposed to be advertiser-supported, but SEnuke strips out the ads when doing the submissions, to speed things up. We suggest you do the majority of your account creation using your own IP address or the proxies provided by SEnuke, and THEN use HotSpotShield for the websites that you weren’t able to create accounts at. It’s also a good idea to run CCleaner before starting up HotSpotShield to make your computer squeaky clean of footprints.

Added sequential article loading in load articles from directory option

When using the “load articles from directory instead of using spinner” option, you had no control over which articles were posted to which websites. SEnuke would pick an article at random and post it to one of the websites. Many times, the same article was posted to multiple websites because of this. We’ve now changed the load articles option to work sequentially through the list of articles. If SEnuke runs out of articles in the directory, it will start again from the first article.

Fixed download seed article from EzineArticles button

Fixed all broken sites

Updated Web 2.0 profile nuke site list.. click on “Download New List”

Made SEnuke registration password invisible

In other news:

Work on the next SEnuke software re-write is going super well. Just another few months ’til we announce SEnuke X! It’s gonna be a powerful game-changer. There will be nothing like it on the market, not even 50% as powerful Got lots of goodies and new features lined up, will be releasing some beta version screenshots soon

- Areeb

Hey guys,

The much awaited update was just released!

Here’s what’s up:

Added 18 NEW Social Network sites!!

We just doubled the size of the social network module! We’ve just added 18 new sites similiar to blogspot, wordpress, hubpages etc. These high PR sites rank very well on Google, and 95% of them are dofollow, so you will get some really good link juice. And your link wheels can now be huuuuuge! Now you can create almost 40 different blogs on well-respected authority sites, all on different IP’s, at the click of a button. Imagine the Google domination power that gives you!

No other software on the market automates even close to this many well-respected websites

Added NEW RSS Joiner feature -> Combine multiple RSS feeds into one!

This was a repeating feature request at the forum, and it has just been fulfilled. Go to the Windows->RSS Joiner inside the software and now you can combine multiple RSS feeds into one giant feed for submission to all the RSS directories, from inside the software!

This one big feed contains links to all your posts that SEnuke has created for you, so you will get much better link coverage from the RSS directories.

IE8 Compatibility Added!

While the software did work with IE8 prior to this update, the success rates were lower. We’ve just improved success rates with IE8, and now it should work as well as IE7, if not better.

Note: The video module still isn’t compatible with IE8, so if you use that a lot, don’t upgrade your version of IE!

No more mobile verification when creating Google accounts.

Tired of Google asking you for your mobile phone number every time you want to create a Google account? We’ve figured out a work-around which lets you create Google accounts without needing mobile verification. These accounts normally stay mobile-verification-free for a few hours: enough time for you to create all your accounts, verify the emails, and never have to touch that gmail account again If you try to log into that account the next day though, you will have to complete the verification process.

Note: If Google starts throwing mobile verification messages at you after creating a few accounts, just run CCleaner and they’ll go away again.

Added memory for custom sites added to the ’show search result positions of’ box

In the niche research module, where you can specify which websites SEnuke should highlight for you in the search results, you can now add custom sites of your choosing to monitor, and SEnuke will have these saved everytime you load it.

Added article summary box in options screen

Some people requested that they should be able to specify what SEnuke fills in for the article summary when doing submission to the article directories. You can now specify that in the Options screen, right underneath the author bio box.

Thesaurus is now fixed.

Ability to use multiple #randurl# commands inside the same article.

Fixed randomization of identical spinner macros

If you tried spinning {a|b|c}{a|b|c}{a|b|c} inside SEnuke before, it would either give aaa or bbb or ccc. Now it gives correct random spinning: abb, bbc, bab etc. Note that this issue only happened with macros that were IDENTICAL to each other, so most people didn’t even notice the problem.

NEW close_msgboxes.exe macro script to auto-close msgboxes that pop up in the browser windows

Idea and sample code courtesy of Jeff W. This script automatically closes all those annoying pop up message boxes that showed up when doing submissions to certain sites, halting all other submissions that were in progress.

Note: Some antivirus programs falsely detect this as a virus because it was written in AutoHotKey. It’s completely safe, just ignore the warnings. Here’s a post about this: http://www.donationcoder.com/Forums/bb/index.php?topic=16057

Better/more secure  software licensing system

Would love to hear your thoughts on the update

Hey guys,
As you might or might not be aware, the SEnuke servers were under attack by hackers three separate times this past weekend.

Only a few people were affected by it because it happened on a weekend and the problem was resolved within a couple of hours.

However, we had to do a complete restore of the server from backup, so almost a whole day’s worth of data was lost (Sept 27th).

Most people reading this will not be affected by this data loss, but if you were active on the SEnuke website on Sept 27th, we might not have received your correspondence.

If you signed up for a new SEnuke account or upgraded your existing account on that date, you might have to send us a message at the Help Desk (by logging into www.senuke.com/membership/login.php) again if your account doesn’t seem to be working. This also applies to any help desk tickets or forum posts you might have made.

Moreover, fixing all the issues that these attacks caused took up valuable hours that we wanted to devote to putting out the next update.

As a result, the next SEnuke update will be delayed by 24-48 hours.

Probably closer to 24 hours but it could take up to 48 hours.

An email will be sent out to everyone once the update is released.

We thank you for your patience, and sincerely apologize for any problems this may have caused you.

We are working with our security team to make sure this never happens again.

-Areeb

Hey guys,

First of all, our sincerest apologies if you’ve been getting low success rates with some of the SEnuke modules.

The last update was over a month ago, and a few sites have changed their submission systems. No update in a whole month is very unlike us (if you’ve been following us for a while).

The reason for the delay this time is that we’re working on a massive update.

This update will add about 20 new sites in the social network nuke module. That is our most popular module and we wanted to take it to the next level However, adding sites to this module is not an easy task…

These 20 new sites will be in PR ranges 6 to 9. This means that now you can press the Start button and have blogs/hubs/wikis/pages created instantly on almost 40 high PR sites like hubpages, blogspot and wetpaint. And most of these links are dofollow! Imagine all the link juice you can get and the massive linkwheels, and blog networks you can create with one click!

Another reason for the delay is that we’re working on making SEnuke fully compatible with IE 8. Making the video module compatible will take some time, but the rest of SEnuke will be fully compatible with IE 8 for the next update.

Other than that, we’re working on a better registration system inside the software, and adding a bunch of member requests.

All this has taken us longer than we expected and our sincerest apologies for that, but just know that we haven’t been sitting around lazily It will be well worth the wait!

Moreover, work is well underway to create SEnuke from scratch in a completely new technology which will allow for scheduled submissions, background submissions, submissions without using Internet Explorer, and lots of other cool new goodies that members have requested, plus it’ll make it a lot more stable.

So keep your eyes peeled for the next email from us announcing when the update goes live. Should be Monday, Sept. 28th

-Areeb